SUPER VOYAGER E (3-CELL) ASSEMBLY KIT  w/Brushless Motor
No.88220
(INCLUDES)
• NHM-30-8BL (Brushless Motor)
• NHA-70-SB (Speed Controller)

Super VOYAGER E has inherited and improved over our best-selling electric helicopter VOYAGER E.
Based on our design concept, "For every modeller from a beginner to an advanced operator, " we have renewed a frame layout and  adopted a rotor head unit with higher kinematic performance and a brushless motor jointed developed by a German corporation, HACKER, to realize "super" workmanship.
The component parts of conventional VOYAGER E are available for Super VOYAGER E owing to their interchange ability.

Feature

•Designed for 3 cell Li-Po Battery use only 
•JR-CCPM 1 20
•Special fibreglass main frames to absorb vibration and increasing rigidity
•Main frame layout with easy maintenance
•All-round type flybar paddle
•Belt drive system
•Wide drive belt
•Aluminium front pulley
•Landing gear with easy assembly
•Battery mount which can be stored into Cabin
•Wooden main rotor blades (included)
 
Specifications

Overall Length 865mm
Overall Width 157mm
Overall Height 298mm
Main Rotor Diameter 970mm
Tail Rotor Diameter 175mm
Gross Weight 1,600g
Gear Ratio 5 :1: 4.5
Motor options NHM-30-8BL (Outrunner brushless motor)
KV value 1100rpm
Diameter 37mm
Length 48mm
Shaft diameter 5mm
Speed Controller options NHA-70-SB (Switch mode BEC)
Battery options 3 Cell Li-Po Battery 11.1 V 3300mAh (Dischargeable over 20C)
Maximum dimension 150mmX45mmX30mm

Battery and Charger are not included Hacker
NHM-30-8BL and NHA-70-SB Joint development: Hacker Motor Gmbh, Germany

Tools needed to assemble/adjust the Super Voyager E (not included)
•Philips Screwdriver (Large/Small)
•Scissors
•Hobby Knife
•Nut Drivers (4mm, 5mm, 5.5mm)
•Pliers
•Ruler (Over 20cm)
•Drills (1.8mm, 2.3mm, 6mm)
•Universal Pitch Gauge (No.60326)
•Epoxy Resin (30 minute)
•Quick Drying Glue
•Cellophane Tape
•Super servo horn 4 pcs. (with 20mm from the required hole) (Included in kit)
•Allen Wrenches (1.27mm, 1.5mm, 2mm and 2.5mm) (Included in kit)

Necessary items needed to fly the Super Voyager E
(Please note that needed items are different depending on a kit)
•Radio system with 1 20degree CCPM function
•4 standard Servos or 4 mini Servos and 1 Gyro.
• Battery and Switch for receiver are not needed.
•3 Cell Li-Po Battery 11 lv 3300mAh (Dischargeable over 20C) Maximum dimension l5OmmX4SmmX3Omm
•Charger (Please use what suit to the battery)
•Motor: NHM-30-8BL (included in No.88220 kit)
•Speed Controller:NHA-70-SB (included in No.88220 kit)

CAUTION

The radio controlled model helicopter contained in this kit is not a toy but a sophisticated piece of equipment. This product is not recommended for use by children. Even if you are an experienced pilot we recommend that you ask advice from hobby shop where you purchased your model whenever you have questions about its assembly or flight. Radio controlled models such as this are capable of causing both property damage and/or bodily harm to both the operator/assembler and/or spectator if not properly assembled and operated. Please choose the safe places to fly your model, where no houses, electric wires and roads are around. Keep away from parks, etc. When operating your model helicopter, please exercise high levels of caution and safety. The radio controlled model helicopter contained in this kit is not a toy but a sophisticated piece of equipment. This product is not recommended for use by children. Even if you are an experienced pilot we recommend that you ask advice from hobby shop where you purchased your model whenever you have questions about its assembly or flight. Radio controlled models such as this are capable of causing both property damage and/or bodily harm to both the operator/assembler and/or spectator if not properly assembled and operated. Please choose the safe places to fly your model, where no houses, electric wires and roads are around. Keep away from parks, etc. When operating your model helicopter, please exercise high levels of caution and safety.