Radiolink AT10II 2.4G 10CH & 12ch Receiver Transmitter

The RadioLink AT10 2.4GHz 10CH control system is extremely versatile and can be used by beginners and pros alike.
Weighing less that 1KG, the AT10 is extremely light, given it's capabilities! Compatible with most types of RC aircraft including airplanes, gliders, helicopers and multicopters the A10 packs a huge amount of features normally found or more expensive units....

 

The RadioLink AT10 2.4GHz 10CH control system is extremely versatile and can be used by beginners and pros alike. Weighing less that 1KG, the AT10 is extremely light, given it's capabilities!

 

Compatible with most types of RC aircraft including airplanes, gliders, helicopers and multicopters the A10 packs a huge amount of features normally found or more expensive units.

 

Its large array of features can be configured and controlled via its 480x320 16 colour 78 x 52mm 16 TFT screen. The A10 takes advantage of modern 2.4GHz direct sequence spread spectrum technology (DSSS) to provide a robust data link to your aircraft at up to 1000 meters.
The connection is also two way and with the included 10 channel receiver and power return module allowing your model to post back information to the A10 including battery voltage, RSSI and so on.
The A10 also has a high 2048 resolution for all channels with a 3ms response time from stick to receiver output.

 

In order for you to make the most of the system and to fly safely, please be sure to read the manual, which is available on our support forum, a link to which is at the bottom of the page.

 

Please note that the A10 requires 8x AA batteries which are not supplied.

The AT10 is available in both orange and Grey. Make your selection above.

 

Feature:

    10 channels

    2.4GHz ISM band frequency

    3.5 inch 16color LCD

    Perfect for any aircraft

    Includes hardware to add auto-centering for the left (throttle) joystick

    The Radiolink AT10 2.4G 10CH Transmitter w/ R10D Orange Receiver

    is an affordable radio system made for aircraft with a range of 2km. It also includes a 3.5" LCD
    screen to keep you informed on your aicraft status.
 

    FAST

    Fast response, 3ms only, which is much less than the average 20ms even 10 channels it
    acts synchronously
 

    COMPLETED

    Including helicopter 8 swash plate models, fixed wing 2 airfoils 3 rears, gliders 4 airfoils and 2 rears.
 

    STABLE

    DSSS spread spectrum mode supplies better performance in anti-interference
 

    DATA TELEMETRY

    Exclusive technology: support signal strength, receiver voltage monitored and extending battery
    voltage, temperature, motor RPM, GPS etc
 

    HIGH SECTION PRECISION 4096 RUDDER SHAKE FREE

    4096 section precision, 0.25us per section, servo anti-shake rudder
 

    COLOR LCD

    3.5 inch 16color LCD, resolution 320x480 distinct and magnificent
 

    ENERGY SAVING MAKES FANTASTICALLY EFFICIENT

    Current consumption 130mA, 40% of similar products in the market
 

Specification Of R10DS Receiver:

    Dimension: 18.0x9.5x22cm

    Weight: 0.95kgs

    Frequency: 2.4GHz ISM band (2400MHz to 2485MHz)

    Modulation mode: QPSK

    Channel bandwidth: 5.0MHz

    Spectrum: DSSS

    Adjacent channel rejection: > 38dBM

    Transmitter power: < 100mW(PCB testing), < 20dBm(3 meter air testing)

    Operating Current: < 105mA

    Operating Voltage: 8.6-15V

    Control distance: 2km

    Channel: 10 Channel, channel 8-10 are customizable

    Screen: 16 colors screen,size 78x52mm.320*480 pixel

    Switches included: two 3-section, five 2-section, one reset switch and five proportional potentio-meter

Specification of the AT10II Transmitter:

    Frequency: 2.4GHz

    Channel: 10CH,support SBUS and PWM signal output

    Working Voltage:4.8-10V

    Working Current:38-45mA

    Dimension:50x31.5x14.5mm

    Weight:14g