8IGHT Nitro RTR: 1/8 4WD Buggy LOS04010V2
Description
The 8IGHT™ racing platform has multiple ROAR national titles and international wins to its credit. This thoroughly equipped, RTR version gives anyone eager to get into nitro buggy racing everything they need to be a contender, right out of the box.
Your fast track to nitro buggy racing
4mm 6061-T6 Aluminum Chassis Plate
Dynamite® .21 nitro engine with pull start
Metal-gear transmission and sealed differentials
Gen III radio tray for longer servo life
In The Box
(1) 8IGHT 4WD Nitro Buggy RTR
(1) Spektrum SLT 3-Channel SLT Radio System
(1) Dynamite 1600mAh 6V NiMH receiver pack
(4) AA Transmitter Batteries
(1) 4-Way Cross Wrench
(1) Product Manual
Needed to Complete
(1) 20-30% Nitromethane fuel
(1) Nitromethane-Approved Dispenser
(1) NiMH Battery Charger with Rx charge lead
(1) Glow Igniter
Overview
If you are serious about becoming a competitive nitro buggy racer, this is the place to start. The Losi® 8IGHT Nitro Buggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .21 nitro engine and the precise response that only a Spektrum™ SLT radio system can provide. You also get the benefit of a pre-set suspension that shares the same geometry team drivers use on their 8IGHT buggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle’s performance with many of the 8IGHT option parts currently available.
Features
Your fast track to nitro buggy racing
Spektrum SLT 3-Channel SLT Radio System
Spektrum SLR300 Surface Receiver
Spektrum S614 Waterproof Metal Gear Surface Servo, 23T
4mm 6061-T6 Aluminum Chassis Plate
Gen III radio tray for longer servo life
Dynamite® .21 nitro engine with pull start
Pre-set suspension geometry
Metal-gear transmission and sealed differentials
Center and rear dogbones
15mm adjustable oil-filled shocks
Video Overview: https://youtu.be/oR7H9a2QWCQ
Race-Proven Durability
In addition to its 4mm T-6 aluminum chassis plate, the 8IGHT Nitro buggy uses a Gen III radio tray that prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It has been designed to resist wear and tear from chassis flex, too.
Brute Power
A powerful Dynamite .21 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don’t have to buy a starter box to get racing right away.
Metal-Gear Drivetrain and Sealed Differentials
A metal-gear transmission and sealed differentials give the buggy all the durability it needs for long mains and rough conditions.
Center and Rear Dogbones
These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.
Pre-Set Suspension Geometry
The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.
Specifications
Chassis 4mm 6061 T-6 aluminum
Completion Level Ready-To-Run
Drivetrain 4WD
Product Height 7.1″ (180 mm)
Final Drive Ratio 11.5:1
Rear Track 12.1″ (307mm)
Wheelbase 12.7″ (323 mm)
Product Weight 7.8lbs (3.5kg)
Vehicle Type Buggy
Water-Resistant Yes
Battery Included
Power Type Nitro
Fuel Tank Capacity 4.2oz (125cc)
Ground Clearance 2.4″ (60mm)
Internal Gear Ratio 3.92:1
Product Length 19.6″ (498 mm)
Spur Gear 50T
Suspension Independent
Gear Pitch 1.0 MOD
Servos Included
Shock Type 16mm Big-Bore, aluminum body, oil-filled
Front Track 12.1″ (307mm)
Vehicle Size Standard
Product Width 12.1″ (307 mm)
Radio Included
Approximate Assembly Time No assembly required
Body Screen printed, cab forward design
Brakes Composite disc with steel pads
Pinion 17T
Scale 1/8
Charger Sold Separately
Differential Sealed, viscous filled
Receiver Included
