Multiplex Tucan EP Kit 51.2"

Multiplex Tucan Aerobatic Airplane Kit. 214284

FEATURES
Construction: Elapor foam, white in color with birch plywood side
panels in fuselage
Wings: Two-piece Elapor foam with birch plywood reinforcement, carbon
reinforced plastic spar
Aileron Control Dual servo
Spinner: White plastic 2.2" (55mm)
Landing Gear: Fixed tricycle type with 2.2" (56mm) rubber wheels
may be fitted with optional retracts
Canopy: Vacuum molded smoke tinted plastic

INCLUDES
Multiplex Tucan Aerobatic Airplane Kit, with Canopy, Decals, Plywood
Reinforcements and Instruction Manual

REQUIREMENTS
Radio: 6-channel with receiver
Servos: Five micro with metal gears
12" (300mm) Servo Extensions: Four
Motor: Multiplex offers the #33 3663 Power Set (not carried) that
includes a HIMAX C 3528-1000, 55A ESC, LiPo Battery, Propeller
and hardware
Battery: 3S 11.1V, (The Multiplex #15 7371 battery is recommended
but not carried by us. The FlightPower Pro 50 3600mAh 3S 11.1V
(FPWP5080) is compatible. If using the ESC in the #33 3663 Power
Set, the battery connector must be changed to a Dean's Ultra Male
(WSDM1302) to mate with this battery.
Battery Charger: Compatible with selected battery
LiPo charging bag
Building and field equipment

SPECIFICATIONS
Wingspan: 51.2" (1300mm)
Overall Length: 43.7" (1110mm)
Total Weight: 65.2oz (1850g)
Wing Area: 496 sq in (32 sq dm)
Wing Loading: 19 oz/sq ft (58 g/sq dm)
Configuration: Low wing
Airfoil: Semi symmetrical
Center of Gravity: 3.5" (90mm) aft of the wing root leading edge
measured at the fuselage
Control Throws-
Elevator: Up 0.39" (10mm), Down 0.31" (8mm) 20% Expo
Rudder: Right to Left 0.59" (15mm) 10% Expo
Ailerons: Up 0.59" (15mm), Down 0.47" (12mm) 20% Expo
Nosewheel: 0.31, 031" (8, 8mm)

COMMENTS
This model is NOT made of styrofoam and it is not possible to glue
the material using white or epoxy glue. Medium CA glue used with
an activator is the only method of gluing recommended by the
manufacturer.
Video : https://youtu.be/phA-QxNiI3Q